00. The minimum space required for posture analysis is provided below, but it is recommended that the space for dynamic assessment be 1.5 times larger
To ensure accurate results, please make sure there is at least 50cm of space between the equipment and both side and back walls. Additionally, be sure not to block the camera's field of view. Having more space is advantageous for achieving accurate results.
01. Set your mat on a flat surface
If the floor where the camera stand placed is uneven, the measurable height can be reduced by up to 160 cm. Also note that uneven floors can cause errors.
02. Avoid exposure to sunlight when taking measurements
The camera of Moti-Physio uses infrared light. Sunlight contains a lot of infrared light, which can confuse the sensor part of the camera that reads infrared light. Therefore, please use in an environment that does not expose you to sunlight (such as using a blackout curtain). Additionally, please place it in a place where there is no reflective material such as a mirror.
03. Clear the area around the mat
Errors may occur if there are walls around where you are standing, so make sure you have enough space.
Set the minimum separation distance between the mat and the side or back wall where you are standing to 50cm.
00. The minimum space required for posture analysis is provided below, but it is recommended that the space for dynamic assessment be 1.5 times larger
To ensure accurate results, please make sure there is at least 50cm of space between the equipment and both side and back walls. Additionally, be sure not to block the camera's field of view. Having more space is advantageous for achieving accurate results.
01. Set your mat on a flat surface
If the floor where the camera stand placed is uneven, the measurable height can be reduced by up to 160 cm. Also note that uneven floors can cause errors.
02. Avoid exposure to sunlight when taking measurements
The camera of Moti-Physio uses infrared light. Sunlight contains a lot of infrared light, which can confuse the sensor part of the camera that reads infrared light. Therefore, please use in an environment that does not expose you to sunlight (such as using a blackout curtain). Additionally, please place it in a place where there is no reflective material such as a mirror.
03. Clear the area around the mat
Errors may occur if there are walls around where you are standing, so make sure you have enough space.
Set the minimum separation distance between the mat and the side or back wall where you are standing to 50cm.